Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Compressed Air Systems should be designed for just the right quality of air at the most economical costs. Delair has a wide range of dryers for all your needs.
For general plant and instrumentation air Delair Refrigeration Dryers come in two series Platinum and Delpet in standard capacities. For larger and intricate requirement engineered systems are available.For general plant air, dew points of 4°C to 6°C (dewpoint) are considered adequate, well within the range of Refrigeration Dryers. Refrigerated type Dryers use less energy and hence are lower in first and operating costs.
The Refrigeration type Air Dryer is a packaged self contained unit, fully automatic and produces a steady level of dew point. There is no regeneration cycle with complex valving, no periodic recharging of chemicals, oil in the air stream does not affect performance.
Compressed Air Systems should be designed for just the right quality of air at the most economical costs. Delair has a wide range of dryers for all your needs, for general plant and instrumentation air.
If the application requires extra dry air and PDP below -20°C, the delair has a large range of adsorption dryers for the job-heatless regenerated and energy-less.
Desiccant Dryers, heatless type, use 10 to 15% purge air for regeneration of desiccant i.e. 10 to 15% of compressor power (HP) is being used as energy operating costs for drying thereby increasing the capital costs in installing extra capacity of compressor. They contain two pressure vessels or towers, each containing a quantity of desiccant. One tower dries the air, while the other is being reactivated.
The 'heatless' principle of regeneration is based on the physical property of the desiccant, given as Delsorb as one of its kind in Asia and approved by all major consultants, which liberates the adsorbed water vapour, if air with a low water vapour pressure is passed through it.
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.